Wiring the solar panels done

Written by brad on December 28th, 2009

At least until I get the energy or desire to install the next six panels. We should have plenty of power for construction with six panels.

Today, we grounded the solar panels.

Ground wires attached

Ground wires attached

Close up of grounding lugs attached to the solar panels

Close up of grounding lugs attached to the solar panels

We also finished running the conduit from the combiner box to the battery house. Into the conduit went the hot, neutral, and ground wires from the combiner box which will hook up to the charging unit of the inverter. I also made a small change based on a recommendation from P.D.; I wrapped white tape around the two negative leads coming from the solar panels. I meant to do that just because it made clear which wires were hot and which were negative, but once they were in place, I forgot.

Wiring complete

Wiring complete

The inside cover is back on

The inside cover is back on

Buttoned up

Buttoned up

Next we’re going to work on getting the inverter up and running. The first step is mounting it. It’s a hundred and thirty pounds so it needs a solid mount. I put six 3 inch lag bolts into studs to hold it, plus quit a few sturdy screws into the OSB. It’s not going any where.

Mounting the inverter

Mounting for the inverter

 

Leave a Comment